300kg Wheel Skid Steer Loader
Engine Brand: Kubota
Engine Type: Diesel
Cab: Yes
Lift Capacity: 300kg
300kg Wheel Skid Steer Loader
Product Parameter (specification)
|
Model |
RSL25 |
|
Engine |
Kubota D1105 18.2kw/3,200rpm EPA4 |
|
Main pump |
Italian Hansa |
|
Motor |
Italian Danfoss |
|
Gear pump |
Chinese |
|
Cylinder |
Chinese |
|
Pilot valve |
Italian HP |
|
Control mode |
Hydraulic control |
|
Tire |
5.7-12 |
|
Bucket |
40＂ |
|
Brake mode |
Hydraulic break |
|
Quick-change connector |
Same as Bobcat |
|
Italy FASTGEAR |
|
|
Performance Parameters |
|
|
Operating load (kg) |
300 |
|
Tipping Load (kg) |
600 |
|
Machine Weight (kg) |
1,200 |
|
Max Speed(km/h) |
9 |
|
Rated flux (L/min) |
50 |
|
Tire(track) model |
23×8.5-15 |
|
Rated power (Kw) |
18.7 |
|
Fuel tank capacity (L) |
28 |
|
Self weight bucket (kg) |
1,300 |
|
Bucket capacity (m³) |
0.2 |
|
Structure Parameters |
|
|
Overall operating height (mm) |
3,552 |
|
Height to bucket hinge pin (mm) |
2,642 |
|
Height to top of cab (mm) |
1,900 |
|
Height to bottom of level bucket(mm) |
1,446 |
|
Without bucket length(mm) |
2,267 |
|
Overall length with bucket(mm) |
2,959 |
|
Dumping angle at maximum height(°) |
40 |
|
Dumping height(mm) |
1,933 |
|
Dumping reach(mm) |
441 |
|
Rollback o bucket on ground(°) |
30 |
|
Rollback of bucket at full height(°) |
103 |
|
Wheelbase(mm) |
801 |
|
Ground clearance(mm) |
145 |
|
Angle of departure(°) |
20 |
|
Front turning radius without bucket(mm) |
960 |
|
Front tuning radius(mm) |
1,660 |
|
Rear tuning radius(mm) |
1,253 |
|
Rear axle to bumper (mm) |
910 |
|
Tread width (mm) |
785 |
|
Width (mm) |
914 |
|
Bucket width (mm) |
927 |
Prodection details
OEM/ODM Customization Support (Wholesale-Friendly)
- Full Machine Customization: Color, paint, logo, and nameplate can be customized to match your brand.
- Brand Registration Assistance: We support brand registration and provide authorization documentation.
- Configuration Flexibility: Adjustments based on drawings or market feedback are available.
- Technical Compliance: Emission and control systems can be tailored to regional standards.
This is our packing process to ensure safe delivery.
Before loading:
- Wash and repaint the vehicle.
- Measure the equipment's dimensions (length x width x height), weight, and center of gravity.
- Inspect vulnerable parts (such as hydraulic hoses, instrument panel, and precision components) and mark protective points.
- Determine whether the equipment needs to be disassembled (e.g., removing the boom, tires, or cab to save space).
Loading preparation:
- Cushioning materials: Foam board, wood strips, air cushion film.
- Reinforcement materials: Wire rope, nylon strapping, angle steel, wooden planks.
- Lay moisture-proof wooden planks inside the container.
Loading:
- Use a forklift/crane to place the equipment on the wooden planks, with the center of gravity near the center of the container.
- Secure the base using specialized fasteners (such as twist locks, anchor bolts) or welded L-brackets.
- Maintain a distance of 10 cm or more between the equipment and the container wall, using wooden planks to prevent sway.
- Long overhangs (such as excavator arms) require additional support frames to prevent deformation.
- Wire rope + tensioner for diagonal securing.
After loading:
Each step is photographed and sent to the customer.
FAQ
Hot Tags: 300kg Wheel Skid Steer Loader, China 300kg Wheel Skid Steer Loader manufacturers, suppliers, factory
You Might Also Like
Send Inquiry